Industries

industies-1

Aerospace & Military

The Aerospace and Military industries require a wide range of elastomer and rubber products to meet many different needs. Aerospace and Military applications require products that can withstand exposure to extreme conditions like high and low temperatures and keep pace with high levels of humidity and desiccation, caustic and corrosive chemicals, high pressures and vacuum, ultraviolet radiation and ozone, fuels, wind, saltwater, and desert sand. It relies on high-quality, precision-engineered parts and components to operate in the most demanding physical environments.

✓  Extreme reliability, longevity and durability
✓  Superior resistance to chemical solvents
✓  Great resistance to fuels and hydraulic fluids
✓  Higher efficiency and reduced emissions
✓  Lightweight solutions
✓  Stability at extreme temperatures, dryness, and humidity

industries-2

Automotive Industry

The automotive industry is always transitioning to keep up with rapid innovations. The modern automotive industry is always on the lookout for solutions that are fuel-efficient, cleaner, smarter and safer. So be it stringent environmental regulations, global market dynamics, or consumer mobility needs and preferences, these seals have to offer demanding modern-day solutions.

✓  Elastomer parts for varied systems that cater to the modern automobile industry
✓  Elastomers with a range of hardness (EPDM, NBR, etc.)
✓  A large selection of standard and non-standard O-rings
✓  Resistance to fuels, oils, and various automobile fluids
✓  Stability in extremes of temperature and humidity
✓  Stability in extremes of torque and hydraulic pressure
✓  Chemical inertness

industries-3

Chemical Processing

Chemical Processing uses a wide range of elastomer materials and products in many areas. The main challenges that the Chemical Processing industry comes in contact with are aggressive materials, extreme temperatures and pressures and hazardous byproducts. Therefore, it is integral that every product must meet the highest standards to enable our clients to reach the levels for purity, safety, and performance that is required in chemical processing.

✓ A Wide Range of Materials
✓  Exceptional Sealing
✓  Reduced contamination
✓  Long life
✓  Resistance to reactive fluids
✓  Thermal resistance
✓  Chemical stability
✓  Minimal particles
✓  Imperviousness to corrosive gases
✓  Cleanroom grade

Harkesh Rubber has experience in designing and producing a broad range of high-performance rubber components for use in the Chemical Processing Industry. We can produce custom-shaped molded parts based on customer designs certified materials. Our team of application engineers have extensive experience in engineering custom solutions for the Chemical Processing Industry. Our team can help you find the most reliable and cost-effective sealing solution that is apt for your application. Whether you are creating a new design or are re-engineering existing technologies, Harkesh Rubber can work with you from idea to prototype to production with a very short lead time.

industries-4

Food Processing

The Food Processing industry is extensive. At every stage of the process of transforming raw into finished food products, a wide variety of processing techniques and machinery are used. A wide variety of rubber materials and products are used both to carry out these techniques and also as a part of the machinery. Exposure to extreme hot or cold temperature, high or low pressure, suction, and/or exposure to potentially reactive compounds is a part of industrial food processing. Therefore it is essential that the rubber parts used in the food industry are able to withstand contact with aggressive cleaning and sanitizing agents and processes. Additionally, rubber parts used in the food industry have to be both in composition and design, resistant to microbial growth. The Food Processing Industry faces specific challenges from the mechanical, chemical, thermal, and hygienic processes. Each of these poses independent challenges when it comes to designing rubber parts best suited for each particular process.

✓  A wide range of materials with varying levels of hardness (Silicone, EPDM, NBR, etc.)
✓  A large selection of standard and non-standard O-rings
✓  Diaphragms and seals of various materials exhibiting:
✓  Resistance to greases, oils, water, alcohols, acids and/or alkalies
✓  Chemical inertness
✓  Resistance to chemicals used in industrial cleaning and sterilization
✓  Steam sterilization resilience
✓  Stability in extreme temperature situations
✓  Composite rubber-bonded parts

Harkesh Rubber has experience in designing and producing a broad range of high-performance rubber components for use in the Food Processing industry. We can produce custom-shaped molded parts based on customer designs certified materials. Our team of application engineers have extensive experience in engineering custom solutions with food contact approved compounds. Whether you are creating a new design or are re-engineering existing technologies, Harkesh Rubber can work with you from idea to prototype to production with a very short lead time.

Rectangle=5

Irrigation

Crop cultivation, water management, fertilization, pest management, harvesting, post-harvest handling, transportation, and packaging come under Modern Industrial Agriculture. At every stage, the tools and machinery make significant use of different rubber materials and products. The various elastomers, rubber materials and products used in the Agricultural Industry have different requirements and depend on the exact circumstances of use. These rubber components should have weather resistance, ability to withstand heat, cold, frost, resistance to ozone and UV degradation, and imperviousness to the variety of agrochemicals that they come in contact with.

✓  Seals for irrigation products
✓  Seals for agricultural machinery
✓  A wide range of elastomers of various hardnesses
✓  A large selection of standard and non-standard O-rings
✓  Diaphragms and seals of various materials exhibiting:
✓  Resistance to UV and Ozone radiation
✓  Chemical inertness
✓  Stability in extremes of temperature and humidity

Harkesh Rubber has experience in designing and producing a broad range of high-performance rubber components for use in the Agricultural Industry. We can produce custom-shaped molded parts for specific environmental conditions. Our team of application engineers have extensive experience in engineering custom solutions with food contact approved compounds. Whether you are creating a new design or are re-engineering existing technologies, Harkesh Rubber can work with you from idea to prototype to production with a very short lead time.

Medical & Life Sciences

Medical & Life Sciences

The Medical and Life Science industries use elastomers for several applications including diagnostic and surgical instruments, pharmaceutical manufacturing machinery, and many other non-implantable medical devices. Medical grade silicone rubber is the ideal material choice for many medical and bioscience applications as it can be easily sterilized. Silicone rubber is biochemically inert, elastic and flexible, naturally resists bacterial growth, can be formulated to be anti-microbial and is heat stable. These elastomers must meet higher standards with regard to biocompatibility, chemical inertness, low extractable content, and toxicity. A number of standard and non-standard O-rings to choose from Diaphragms and seals that offer :

✓  Excellent resistance to chemical solvents
✓  Resilience under aggressive sterilization conditions
✓  Chemical inertness
✓  Bio-inertness
✓  Stability at extreme temperatures
✓  Resilience to vacuum and suction pressures
✓  Low friction and self-lubricating compounds

Harkesh Rubber has experience in designing and a broad range of medical rubber components for use in pharmaceutical manufacturing, diagnostic and surgical instruments and other non-implantable medical devices. Our team of application engineers have extensive experience in engineering custom solutions for many different medical/life science technologies. Whether you are creating a new design or are re-engineering existing technologies, Harkesh Rubber can work with you from idea to prototype to production with a very short lead time

Oil & Gas

Oil And Gas

The Oil and Gas Industry makes use of a wide variety of rubber materials and products in processes like Exploration, Extraction, Refining & Transporting. When it comes to sealing technology, no other industry poses a greater challenge in the way the oil and gas industry does. The Oil and Gas Industry requires the highest quality rubber components to meet the standards that will attain levels of reliability, safety, environmental friendliness that are required in Oil and Gas processing. Each process, together with the set of environmental variables relevant to that process, will determine which types of rubber components are best suited for each specific situation. Conforming to all seal standards is not only mandatory due to economic reasons, but also because seal failure can cause tremendous harm to the environment and human life.

We offer a large selection of Standard and Non-standard rings, Diaphragms, Seals, and Custom-molded parts of various materials exhibiting:

✓  Corrosion resistance
✓  Vibration resistance
✓  Thermal resistance
✓  Stability under pressure
✓  Chemical stability
✓  High Pressure

At Harkesh Rubber, we can produce custom-shaped molded parts based on customer designs using specialized compounds custom-designed for specific environmental conditions. Our team of application engineers have extensive experience in engineering custom solutions for many different medical/life science technologies. Whether you are creating a new design or are re-engineering existing technologies, Harkesh Rubber can work with you from idea to prototype to production with a very short lead time.

Begin typing your search above and press return to search.