Case Study, Diaphragm, Oil Seals

What Makes Cryogenic Deflashing Method a Cut Above The Rest?

Before the final inspection and packing, moulded rubber parts must undergo a finishing process to remove excess flashes. “FLASH” is an excess amount of rubber that oozes out between the two halves of a mould during the moulding of rubber parts. ...

By harkesh-rubber OnNovember 16, 2018

Case Study

Case Study – Special EPDM Compound Diaphragm for Aircraft Engine Application

ABOUT THE CLIENT The Client is an established Control Valve Manufacturer from America. BUSINESS PROBLEM The vendor who provided the rubber seals for the client for almost 5 decades was acquired by the competition. Since the vendor had to comply to ...

By harkesh-rubber OnOctober 4, 2018

O-Rings

The Significance Of O-Rings For Sealing Solutions

Since the first one was registered in 1896, it won’t be wrong to say that o-rings were one of the oldest inventions! This ring-like designed loop helps in the prevention of gases or liquids. It is known to be one of ...

By harkesh-rubber OnSeptember 28, 2018

Oil Seals

Custom Seals That Provide Trusted Results for the Automotive Industry

The exteriors and interiors of the automotive transit vehicles portray a variety of sealing challenges. In many cases, the o-ring does not suffice as a definite sealing solution, which can prove to be fatal. And that itself cannot be allowed to ...

By harkesh-rubber OnAugust 29, 2018

Case Study, Diaphragm

Valve World Expo: The Biggest Valve Industry Affair Under One Roof!

The Valve World Expo is the biggest ground to showcase and encounter the experts from the valve industries around the world. It is a one-stop shop that will assemble many great minds and act as a platform to meet proficient valve ...

By harkesh-rubber OnAugust 1, 2018

Diaphragm

5 Factors to Consider While Selecting a Pneumatic Diaphragm Actuator

Whether it is refineries, manufacturing plants, or pipeline compressor stations, you will find pneumatic diaphragm actuators working day-in and day-out to help run these facilities. An actuator is a mechanical or electromechanical device that converts energy to provide controlled or limited ...

By harkesh-rubber OnJuly 27, 2018

Case Study

Case Study – Diaphragms for Control Valves

About the client The Client is a leading control valve manufacturer based in Germany. Business Problem The client was not happy with their existing diaphragm supplier due to consistent delays in supplies. The supplier’s delivery cycle time was higher than the ...

By harkesh-rubber OnJuly 27, 2018