Seals

An Oil Seal environment consists of a shaft that is rotating inside a housing or a bore. Due to friction, there would be some clearance between the shaft and the bore. The function of the Oil Seal is to stop the fluid inside from leaking out the clearance between the shaft and the housing. The seal may also be used to prevent outside materials, such as dirt, from moving in through the clearance.

"Dynamic sealing" is the relationship between the rotating shaft and the seal and is handled by the sealing element. A garter spring may be used in the oil seal to increase the radial interference between the seal lip and contact point on the shaft. In order to achieve this interference, the oil seal's ID must be slightly smaller than the diameter of the shaft.

"Static sealing" is the relationship between the housing and the seal. In order to achieve this interference, the oil seal's OD must be slightly larger than the diameter of the housing or the bore.

An Oil Seal normally consists of three basic components: the sealing element, the metal case and the spring. The purpose of the sealing element is to stop the fluid from leaking between the shaft and the housing. The metal case will impart rigidity and strength to the seal while it is being held in the bore or the recessed groove. The spring will help make the sealing element more effective. All materials should be selected depending on the environment in which the Oil Seal will function

Do you have an enquiry

      Our Telephone Number -
      +91- 22-40060400